Men's Activewear FAQ: Fit, Fabric, and Care Questions Answered

Quick Answer

Buy men's activewear that fits close but not tight, with full range of motion at the squat and overhead reach. Choose breathable fabric for sweaty training and a soft brushed fabric for warm-ups and rest days. Wash in cold water, skip fabric softener, and air dry to protect stretch and colour.

Most men's activewear questions come down to three things: whether it fits, whether it breathes, and whether it survives the wash. Get those right and you stop replacing gym clothes every season.

Below are the questions we hear most often, answered in short standalone blocks. Each one gives you a concrete way to check fit, judge fabric, or care for a piece, with real examples from the andar men's activewear range.

How Should Men's Workout Clothes Fit?

Men's activewear should sit close to the body without restricting movement. Check three points: the waistband should stay put when you squat, the crotch should not pull when you step wide, and the hem should not ride up when you reach overhead. If any of those fail, size up or switch to a cut with more room through the hip and thigh.

For tops, a fitted cut is fine for training, but an oversized fit gives you airflow and doubles as everyday wear. If you are between sizes, choose the larger size for bottoms you will squat in and the smaller size for a base layer you want under a jacket.

• Do a bodyweight squat and an overhead reach before you decide to keep a piece.
• Waistbands that roll down usually mean the rise is too short, not that the size is wrong.

What Makes Men's Activewear Breathable?

Breathability comes from how thin and open the fabric is, plus how much air can move through the cut. A light, thin fabric that does not trap sweat inside will feel cooler than a heavy knit, even if both are labelled as training gear. Loose or oversized cuts add airflow on top of that.

Look for fabric descriptions that mention lightness and sweat management rather than vague claims. If a product page does not list a fabric weight, breathability rating, or composition, treat that as a missing detail and judge the piece in person or ask the store before buying.

• Hold the fabric up to light: if you can see through it slightly, air will move through it too.
• For hot sessions, prioritise thin fabric and a relaxed cut over compression.

How Do I Care for Men's Gym Clothes So They Last?

Wash activewear in cold water on a normal cycle, turn pieces inside out, and skip fabric softener. Softener coats stretch fibres and reduces their ability to recover, which is why leggings and joggers start to sag. Wash with similar colours and avoid overloading the machine so the fabric can move freely.

Air dry whenever you can. If you use a dryer, keep it on low heat and take pieces out slightly damp. Heat is the main cause of fading, shrinkage, and lost stretch, so the dryer is the single biggest risk to your gym clothes.

• Use a mesh laundry bag for small items like socks and underwear.
• Wash sweaty clothes the same day when possible to stop odour setting in.

How Should I Size Men's Activewear?

Start with your usual waist size for joggers and jeans, then check the length options. Some men's bottoms are offered in multiple lengths, which lets you match your inseam instead of relying on a single regular cut. If a product only lists waist and no inseam, measure a pair you already own and compare before ordering.

For tops, use your chest measurement rather than the size you wear in other brands. Oversized fits are intentionally roomy, so if you want a standard fit, take one size down from your oversized size.

• Measure a favourite pair flat and compare waist, rise, and inseam to the size chart.
• When in doubt on bottoms you will train in, size up rather than down.

Quick Checks Before You Buy or Wash

Fit check

Squat, step wide, and reach overhead in the piece. If the waistband rolls or the fabric pulls, change the size or the cut. Comfort through full range of motion is the pass mark.

Breathability check

Prefer light, thin fabric that does not trap sweat, and a relaxed cut for hot sessions. If fabric details are missing from the listing, ask before you buy. Thin fabric plus airflow beats heavy compression in the heat.

Care check

Cold wash, inside out, no fabric softener, air dry or low heat. Wash sweaty pieces the same day. Heat and softener are what shorten the life of activewear.

Men's Activewear Examples From Our Range

• Men's Airdenim Tapered Jeans: Tapered cut available in Colour, Size, and Length options. The length option lets you match your inseam instead of settling for a single regular cut, which matters most for a tapered leg.
• [OUTLET] Men's Airsolid Light Fleece Cargo Joggers: Light fleece cargo joggers available in Colour and Size. A light fleece jogger suits warm-ups and cooler days, while the cargo pockets add everyday utility. No length option is listed, so check the size chart for inseam.
• Brushed Airy Fit Oversized Fit Long Sleeve: Peach-skin warmth in lightweight fabric, with a suede-like finish inside and an oversized fit with slits. The light, thin fabric does not trap sweat, so it works as a warm layer without overheating. The oversized cut and slits add airflow and everyday style.

Fit, fabric, and care cover most of what goes wrong with men's activewear. Get the fit right in the change room, choose breathable fabric for the conditions you train in, and keep heat and softener away from your gym clothes. That routine keeps your kit comfortable and in service far longer.